Products & Services

POWER:

(4) deep cycle 6 volt batteries in a self contained box with quick disconnect

(1) 80 watt solar panel with charge controller

12 volt power system

The system will operate for 14 days straight 24 hours a day without a charge

DIMENSIONS:

5’2” long

5’4” wide

WEIGHT:

1600 lbs. with a 3500 LB axle. You will never overload or overwork a ROBOFlagger

LIGHTS:

(2) 12” LED Lights red/amber

(2) 4” amber LED lights (located on the reverse of the signal head for operator indication)

GATE ARM:

Gate arm is 2” wide

88” retro reflective red & white striped (4”)

Longer or shorter length available

SIGNAL:

OPERATOR INTERFACE TERMINAL:

Graphics provide quick reference to the ROBOFlagger's status, as well provide a means to make quick adjustments to the ROBOFlagger

Pots to control the Fast/Slow speed of the gate arm

The remote control operates on a 900 MHz spread spectrum frequency that requires no license for operation. It utilizes 4 AA batteries that last up to 160 hours. The range on the remote is up to 1 mile. The entire remote control weighs less than one pound!

Utility Version:

12 Volt light on the stop here on red sign

LED’s surface mounted to the gate arm

Construction Road Cone Holder. The unit is able to carry up to 18 36” standard road cones

48” Roll up Sign Carrier. You can store up to four 48” standard constructions roll up vinyl signs

Sign stand carrier- you can hall the sign stands for the 48” roll up signs on the top of the system with secure storage

12 Volt wench for faster raising and lowering of the signal head

The ROBOFlagger Utility is a complete system that is ready to flag at any time. All necessary components are on the unit for flagging. In addition to all necessary components on the system using the 12 volt light and LED lights in the gate arm allow the user SAFE operations in dim lighting. Now there is a system that will work from Dawn-To-Dusk. This is another first introduced to the industry by First Call Flagging

All of the features on the ROBOFlagger Utility version are available as bolt on options to the standard ROBOFlagger.

Security Camera

A security camera system is mounted to the standard ROBOFlagger. The video feed is connected to the PLC (Programming Logic Controller) to indicate the status of the entire unit. You have 360 Degrees of coverage. All data is recorded on a data recorder on a constant loop.

Using the Security Camera option gives the end user the ability to have documentation in the event of an accident.